The beer-lover in your life will love this unique gift box! It’s fun and easy to make and is a great way to spruce up your gift this year.
Supplies:
- 3D Father’s Day Beer Gift Box
- Cardstock: white, yellow, and blue
- Glue
- Double-sided tape
- Tweezers
Upload the templates to Cricut Design Space
- Log into Design Space
- Click the Create New Project button
- Click the Upload button
- Click the Upload Image button
- Click the Browse button and locate the SVG file for this project.
The file will be uploaded to Design Space and will appear in the Uploaded Images gallery. From there you can access and begin working on it.
Te Cricut accessories you need for this project are:
- Fine point blade
- Scoring stylus or scoring wheel.
Arrange the layers on Cricut Design Space
Select all the layers and ungroup them.
Select the layers containing the pieces you don’t need and delete them.
Select the layers containing the score lines and on the upper-left menu select score.
Select every piece together with its corresponding score lines and attach them.
Repeat this step for every 2 layers (score + basic cut) that must be together. Then, press the “Make it” button and start cutting.
Assemble the card
Grab the biggest white piece and fold it according to the score lines.
Apply glue to the yellow pieces and attach them to the white piece as shown above.
Use double-sided tape to assemble the mug, by putting a piece of tape on each flap.
Take off the vinyl protector and atach the flaps to the base of the mug.
Take the vinyl protector off the side flap and finish attaching the piece.
Repeat the same process with the smaller white piece. Fold the piece according to the score lines. Put tape on the flaps.
Take off the vinyl protector. Attach the flaps to the base.
Grab the white piece that will make up your handle and fold it according to the score lines.
Put tape on the flaps.
Remove the vinyl cover from the tape and then attach the piece.
Apply tape to the two points of the handle that will connect with the mug (you can use a hot glue gun if you’d like the adhesion to be more resistant). Connect the handle and the mug.
Now, take the piece that will serve as the base for the text. Position the letters without glueing them to make sure you have them correctly placed. Apply glue and attach the letters to the base.
Put tape or glue on the backside of the text base. Connect the text piece to the mug.
Fold the yellow portion of the card. Put glue on the white sections that go on the inside of the card, then attach them on the inside of the card.
Attach the foam portions that go on the outside of the card.
Put the card inside the mug, along with any other goodies, close the lid and you’re finished!
Assembly video
Watch the video on how to assemble this craft as described above!
This article was written by
